|
| TECHNICAL FEATURES: |
UNITS |
|
| TRAVEL |
| X Travel |
mm (inch) |
800 (31.5) |
| Y Travel |
mm (inch) |
500 (19.7) |
| Z Travel |
mm (inch) |
540 (21.3) |
| Spindle nose to table |
mm (inch) |
150-690 (5.9-27.2) |
| Spindle |
| Spindle Speed |
rpm |
8000 |
| Automatic tool changer |
| Tool number |
|
24 |
| Max tool diameter |
mm (inch) |
100 (3.9) |
| Max tool length |
mm (inch) |
305 (12.0) |
| Max tool weight |
kg (lb) |
7 (15.4) |
| ATC Type |
|
ARM |
| Tool shank |
|
BT/CAT#40 |
| Motor |
| Spindle motor (cont./30min.rated) |
kw (hp) |
7.5/11(10/14.7) |
| X/Y/Z servo motor |
kw (hp) |
1.5/1.5/1.5(2.0/2.0/2.0) |
| Table |
| Table size |
mm (inch) |
910x500 (35.8x19.7) |
| Max load capacity |
kg (lb) |
500 (1100) |
| T-slot (No. x Width x Distance |
mm (inch) |
3x18x125 (3x0.71x4.92) |
| Rapid Speed |
| X rapid speed |
M/min (fpm) |
24 (78.7) |
| Y rapid speed |
M/min (fpm) |
24 (78.7) |
| Z rapid speed |
M/min (fpm) |
20 (65.6) |
| Cutting feedrade |
mm/min (ipm) |
1-10000 (0.04-39.4) |
| Controller |
| Mitsubishi |
|
M64 |
| Miscellaneous |
| Machine Weight |
kg (lb) |
5000 (11000) |
| Power requirement |
KVA |
20 |
| Coolant capacity |
L |
240 |
| Air source |
kg/cm² (psi) |
6 (85.3) |
|
Standard Accessories: |
• Chip auger
• Full enclosure
• Automatic lubrication system
• Spindle coolant cooling
• Base bolt and pad
• Tools box
• Work light
• Alarm light
• M30 automatic power off
• Chips cart
|
• Portable air gun
• Portable water gun
• Spindle air seal system
• Mechanical, electrical, operation manuals
• Rigid tapping
• Cabinet heat exchanger
• Mechanical oil-coolant separator
• Automatic tool changer
• Telescopic covers
• Arm type ATC 24 tool stations
• Z axis with brake (without counterweight) |
|
|
|
