|
| TECHNICAL FEATURES: |
UNITS |
|
| Table |
| Table surface |
mm |
800x381 |
| No. and width of "T" slots |
mm |
3x18x100 |
| Height from table to the floor |
mm |
872 |
| Travels and capacity |
| Longitudinal traverse (X axis) |
mm |
600 |
| Traverse travel (Y axis) |
mm |
406 |
| Vertical traverse (Z axis) |
mm |
543 |
| Distance from the table centre to the column |
mm |
213-619 |
| Distance from the axis centre to the column |
mm |
405 |
| Max. weight on the table |
Kg |
500 |
| Universal head |
| Spindle taper |
|
MAS-403-BT40 |
| Optional spindle taper |
|
DIN 69871-A ISO-40 7388/1 |
| Pull stud |
|
MAS PT40T-1 (optional DIN69872) |
| Speed range |
min-1 |
60-6.000 |
| Optional speed range |
min-1 |
100-10.000 |
| Motor power (Digital AC) S1/S6-60% |
kW |
7/9 |
| Feeds and ball screws |
| Ball screw (X, Y, Z axis) |
mm |
Ø 40x10 |
| Working feed X, Y, Z |
mm/min |
1 ÷ 10.000 |
| Rapid feed X, Y, Z |
mm/min |
20.000 |
| Accurity data |
| Positioning |
mm |
P: 0,010 |
| Repeatibility |
mm |
R: 0,007 |
| Resolution |
mm |
0,001 |
| General information |
| Total installed power |
kW |
14 |
| Machine net weight |
Kg |
4.000 |
| Machine weight including packing |
Kg |
4.300 |
| Automatic tool changer |
| No. |
|
18 |
| Max. diameter of discontinuous tools |
mm |
135 |
| Max. diameter of continuous tools |
mm |
85 |
| Max. tool weight |
Kg |
6 |
| Max. tool lenght |
mm |
250 |
Standard equipment |
• Hardened and ground prismatic guideways covered by anti-friction material
• 4 guideways from the GVC 750 and GVC 1000 models.
• Main motor (Brushless A.C.): GVC 1000 (11/13kW)
• 10,3/14 Nm servomotors for X, Y and Z axis movements (Brushless A.C. motors)
• RS-232 C communication port
• ISO 3 (G-10) high precision (Ø 40x10mm) ball screws
• Automatic spindle speeds selection by CNC
• Measuring system: linear scales in all three axes
• Pneumatic tool clamping
• Automatic Bi-directional tool changer
• Automatic centralised lubrication
• MAS-403-BT 40 Spindle taper
• Telescopic guarding on the guideways
• Lamp to illuminate the working area
• Complete cooling system
• Cooling of the main spindle
• Pneumatic counterbalance
• Air blast to clean the spindle taper, while tool changes
• Air blast for workpiece cleaning while machining
• Built-in electronic handwheel
• Hard disk (according to CNC) with Heidenhain TNC 426
• Rigid tapping
• Full machine enclosure + safery microswitch with interlocking for opening doors
• Main spindle bearings pressurisation
• Six anchorage points
• Heat exchanger |
|
|
|
