|
| TECHNICAL FEATURES: |
UNITS |
|
| Table |
| Table surface |
mm |
1525x325 |
| No. and width of "T" slots |
mm |
3x16x80 |
| Table turns in both directions |
|
±45° |
| Maximum weight on table |
Kg |
400 |
| Traverses |
| Longitudinal traverse |
mm |
1050 |
| Cross traverse |
mm |
330 |
| Vertical traverse |
mm |
475 |
| Spindle |
| Spindle taper |
|
ISO 40 |
| Main spindle |
kW |
5,5 |
| Milling arbor |
mm |
Ø27 |
| Speed range |
min-1 |
35 ÷ 1800 |
| Number of speeds |
|
Continuous variation |
| Feedrates |
| Number of feedrates |
|
Continuous variation |
| Longitudinal and cross |
mm/min |
0 ÷ 1300 |
| Vertical |
mm/min |
0 ÷ 390 |
| Rapid feedrates |
| Longitudinal and cross |
mm |
2050 |
| Vertical |
mm |
615 |
| Vertical milling head |
| Power |
kW |
3 |
| Speed range |
min-1 |
50 ÷ 4000 (50 Hz)
60 ÷ 4200 (60 Hz) |
| Quill travel |
mm |
127 |
| Weight |
| Machine weight |
Kg |
2600 |
| Machine weight including packing |
Kg |
2950 |
|
Standard equipment |
• Hardened guideways on 3 axes (X, Y, Z)
• Continuos variation speeds of the main spindle
• Continuos variation speeds of the rate
• Automatic feedrates on 3 axes (X, Y, Z)
• Rapid feedrates on 3 axes (X, Y, Z)
• Retractable safety handwheels
• Protection of cross front guide by means of telescopic plates
• Elimination of free plays in the X spindle for milling in "avalant"
• Centralised lubrication (manual pump)
• Coolant splash tray
• Complete cooling system
• 1 Milling arbor - Ø27
• Steady rest for supporting the milling arbor - 2 |
|
|
|
