|
| TECHNICAL FEATURES: |
UNITS |
|
| Capacity |
Swing on bed |
mm/inch |
450 / 17.7" |
| Distance between center |
mm/inch |
645 / 25.4" |
| Max. turning dia |
mm/inch |
260 / 10.2" |
Max. turning length (if W/8"chuck) |
mm/inch |
530 / 20.9" (463/18.2") |
| Bar capacity |
mm/inch |
52 / 2.0" |
| Spindle |
| No. of spindle |
|
1 |
| Spindle speed |
rpm |
40-4000 |
| Spindle nose |
|
A2-6 |
| Spindle thru-hole |
mm/inch |
63 / 2.4" |
| Tool post |
| No. of tool post |
|
1 |
| Type of tool post |
|
12-STATION |
| Stroke of X-axis |
mm/inch |
180 / 7.1" |
| Stroke of Z-axis |
mm/inch |
530 / 20.9" |
| Rapid travel X-axis |
m/min |
20 |
| Rapid travel Z-axis |
m/min |
24 |
| Jog feed rate X-axis |
mm/min |
0-1260 |
| Jog feed rate Z-axis |
mm/inch |
0-1260 |
| Height of square tool |
mm/inch |
25 / 1.0" |
| Dia of boring bar holder |
mm/inch |
40 / 1.6" |
| Index time of tools |
sec |
0.45 |
| Live stock |
| No. of tool |
|
Max. 12 tools |
| Speed of turning |
rpm |
40-4000 |
| Max. of tool shank |
mm/inch |
20 / 0.8" |
| Tail stock |
| Travel of tailstock |
mm/inch |
435 / 17.1" |
| Dia of tailstock |
mm/inch |
90 / 3.5" |
| Tapper of tailstock |
|
MT#5 |
| Travel of tailshock shaft |
mm/inch |
100 / 4.0" |
| Motor |
| Built-in spindle (C-axis) motor |
kw |
18.5 |
| Rotating tool spindle motor |
kw |
3.7 |
| Servo motor X-axis |
kw |
0.6 |
| Servo motor Z-axis |
kw |
2.1 |
| Hydraulic pump |
kw |
1.5 |
| Lubrication pump |
kw |
0.004 |
| Coolant pump |
kw |
400 |
| Other |
| Electric |
KVA |
25 |
| Air pressure |
Mpa |
0.5 |
| Tank |
| Hydraulic |
L |
40 |
| Lubrication |
L |
2 |
| Coolant |
L |
200 |
| Spindle coolant |
L |
100 |
| Size |
| Height of machine |
mm/inch |
1970 / 77.6" |
| Height of spindle's center |
mm/inch |
1060 / 41.8" |
| Length of machine |
mm/inch |
2360 / 93.0" |
| Width of machine |
mm/inch |
1745 / 68.7" |
| Weight of machine |
Kgf |
4300 |
|
Standard accessories |
• Spindle motor
• X & Z axis servo motor
• 3-Jaw thru-hole chuck
• Servo motor hydraulic turret (mm or Inch)
• Chip conveyor interface
• Hydraulic unit
• Programmable hydraulic tailstock quill
• Chuck with M function
• 400w coolant pump
• Boring bar tool holder: 2pcs
• OD tool holder: 2pcs
• U-drill tool holder: 2pcs
• Cycle finish light
• Tool box
• Operation manual and parts list |
|
|
