|
| TECHNICAL FEATURES: |
UNITS |
|
| Capacity |
Swing on bed |
mm/inch |
910 / 36 " |
Swing on cross slide |
mm/inch |
560 / 22.05 " |
| Distance between center |
mm/inch |
1820 / 71.65 " |
Standard turning dia |
mm/inch |
450 / 17.72" |
| Max. turning dia |
mm/inch |
610 / 24.02 " |
Max. turning length |
mm/inch |
1524 / 60 " |
| Bar capacity |
mm/inch |
184 / 7.25 " |
| Travel |
| X-axis stroke |
mm/inch |
340 / 13.38 " |
| Z-axis stroke |
mm/inch |
1524 / 60 " |
| Spindle |
| Spindle speed |
rpm |
12/1200 |
| Spindle nose |
|
A2-15 |
| Spindle thru-hole dia |
mm/inch |
200 / 7.87 " |
| Spindle bearing dia |
mm/inch |
- |
| Turret |
| Type of turret |
|
10-STATION |
| Height of square tool |
mm/inch |
32 / 1.26 " |
| Dia of boring bar holder |
mm/inch |
65 / 2.56 " |
| Tail stock |
| Stroke of tailstock |
mm/inch |
1400 / 55.12 " |
| Stroke of tailstock's shaft |
mm/inch |
200 / 7.87 " |
| Tapper of tailstock |
|
MT5 |
| Tailstock's shaft hole dia |
mm/inch |
160 / 6.30 " |
| Feed |
| Rapid travel X-axis |
m/min |
20 |
| Rapid travel Z-axis |
m/min |
24 |
| Jog feed rate X-axis |
mm/min |
0-1260 |
| Jog feed rate Z-axis |
mm/min |
0-1260 |
| Motor |
| Spindle motor |
kw |
26 |
| Servo motor X-axis |
kw |
2.8 |
| Servo motor Z-axis |
kw |
4.8 |
| Hydraulic pump |
kw |
1.5 |
| Lubrication pump |
kw |
0.004 |
| Coolant pump |
kw |
750 |
| Power |
| Electric |
KVA |
54 |
| Air pressure |
Mpa |
1.5 |
| Air flow |
L/min |
2 |
| Tank |
| Coolant tank |
L |
230 |
| Hydraulic |
L |
40 |
| Lubrication |
L |
2 |
| Size |
| Weight of machine |
Kgf |
11000 |
| Size of machine length |
mm/inch |
4740 / 186.6" |
| Size of machine height |
mm/inch |
2090 / 82.28 " |
| Size of machine width |
mm/inch |
2130 / 83.86 " |
| Height of spindle's center |
|
1110 / 43.7" |
|
Standard accessories |
• Spindle motor
• X & Z axis servo motor
• 3-Jaw thru-hole chuck
• Servo motor hydraulic turret (mm or Inch)
• Chip conveyor interface
• Hydraulic unit
• Programmable hydraulic tailstock quill
• Chuck with M function
• 400w coolant pump
• Boring bar tool holder: 2pcs
• OD tool holder: 2pcs
• U-drill tool holder: 2pcs
• Cycle finish light
• Tool box
• Operation manual and parts list |
|
|
