|
| TECHNICAL FEATURES: |
UNITS |
|
| Capacity |
Swing on bed |
mm/inch |
495 / 19.50" |
Swing on cross slide |
mm/inch |
400 / 15.75" |
| Distance between center |
mm/inch |
845 / 33.25 " |
Standard turning dia |
mm/inch |
287 / 11.25" |
| Max. turning dia |
mm/inch |
400 / 15.75" |
Max. turning length |
mm/inch |
710 / 28" |
| Bar capacity |
mm/inch |
75 / 2.88 " / 77 / 3" |
| Travel |
| X-axis stroke |
mm/inch |
220 / 8.63" |
| Z-axis stroke |
mm/inch |
710 / 28" |
| Spindle |
| Spindle speed |
rpm |
30/3500 |
| Spindle nose |
|
A2-8 |
| Spindle thru-hole dia |
mm/inch |
86 / 3.38 " |
| Spindle bearing dia |
mm/inch |
120 / 4.75 " |
| Turret |
| Type of turret |
|
10-STATION |
| Height of square tool |
mm/inch |
25 / 1 " |
| Dia of boring bar holder |
mm/inch |
50 / 2 " |
| Tail stock |
| Stroke of tailstock |
mm/inch |
580 / 22.88 " |
| Stroke of tailstock's shaft |
mm/inch |
150 / 5.88 " |
| Tapper of tailstock |
|
MT5 |
| Tailstock's shaft hole dia |
mm/inch |
110 / 4.25 " |
| Feed |
| Rapid travel X-axis |
m/min |
18 |
| Rapid travel Z-axis |
m/min |
22 |
| Jog feed rate X-axis |
mm/min |
0-1260 |
| Jog feed rate Z-axis |
mm/min |
0-1260 |
| Motor |
| Spindle motor |
kw |
15 / 18.5 |
| Servo motor X-axis |
kw |
1.0 |
| Servo motor Z-axis |
kw |
3.8 |
| Hydraulic pump |
kw |
- |
| Lubrication pump |
kw |
0.004 |
| Coolant pump |
kw |
400 |
| Power |
| Electric |
KVA |
35 |
| Air pressure |
Mpa |
0.5 |
| Air flow |
L/min |
- |
| Tank |
| Coolant tank |
L |
230 |
| Hydraulic |
L |
40 |
| Lubrication |
L |
2 |
| Size |
| Weight of machine |
Kgf |
5000 |
| Size of machine length |
mm/inch |
2800 / 110 " |
| Size of machine height |
mm/inch |
1800 / 71" |
| Size of machine width |
mm/inch |
1700 / 67" |
| Height of spindle's center |
|
- |
|
Standard accessories |
• Spindle motor
• X & Z axis servo motor
• 3-Jaw thru-hole chuck
• Servo motor hydraulic turret (mm or Inch)
• Chip conveyor interface
• Hydraulic unit
• Programmable hydraulic tailstock quill
• Chuck with M function
• 400w coolant pump
• Boring bar tool holder: 2pcs
• OD tool holder: 2pcs
• U-drill tool holder: 2pcs
• Cycle finish light
• Tool box
• Operation manual and parts list |
|
|
