|
| TECHNICAL FEATURES: |
UNITS |
|
| Capacity |
Swing on bed |
mm/inch |
400 / 15.75" |
Swing on cross slide |
mm/inch |
320 / 12.50" |
| Distance between center |
mm/inch |
645 / 25.25 " |
Standard turning dia |
mm/inch |
216 / 8.50" |
| Max. turning dia |
mm/inch |
320 / 12.50" |
Max. turning length |
mm/inch |
530 / 20.75" |
| Bar capacity |
mm/inch |
52 / 2 " |
| Travel |
| X-axis stroke |
mm/inch |
180 / 7 " |
| Z-axis stroke |
mm/inch |
530 / 20.75 " |
| Spindle |
| Spindle speed |
rpm |
30/4000 |
| Spindle nose |
|
A2-6 |
| Spindle thru-hole dia |
mm/inch |
63 / 2.48" |
| Spindle bearing dia |
mm/inch |
100 / 4 " |
| Turret |
| Type of turret |
|
12-STATION |
| Height of square tool |
mm/inch |
25 / 1 " |
| Dia of boring bar holder |
mm/inch |
40 / 1.50" |
| Tail stock |
| Stroke of tailstock |
mm/inch |
435 / 17" |
| Stroke of tailstock's shaft |
mm/inch |
100 / 4" |
| Tapper of tailstock |
|
MT5 |
| Tailstock's shaft hole dia |
mm/inch |
90 / 3.50 " |
| Feed |
| Rapid travel X-axis |
m/min |
24 |
| Rapid travel Z-axis |
m/min |
30 |
| Jog feed rate X-axis |
mm/min |
0-1260 |
| Jog feed rate Z-axis |
mm/min |
0-1260 |
| Motor |
| Spindle motor |
kw |
7.5 /11 |
| Servo motor X-axis |
kw |
0.6 |
| Servo motor Z-axis |
kw |
2.1 |
| Hydraulic pump |
kw |
- |
| Lubrication pump |
kw |
0.004 |
| Coolant pump |
kw |
400 |
| Power |
| Electric |
KVA |
22 |
| Air pressure |
Mpa |
0.5 |
| Air flow |
L/min |
- |
| Tank |
| Coolant tank |
L |
200 |
| Hydraulic |
L |
40 |
| Lubrication |
L |
2 |
| Size |
| Weight of machine |
Kgf |
4300 |
| Size of machine length |
mm/inch |
2240 / 88 " |
| Size of machine height |
mm/inch |
1770 / 70 " |
| Size of machine width |
mm/inch |
1645 / 65" |
| Height of spindle's center |
|
- |
|
Standard accessories |
• Spindle motor
• X & Z axis servo motor
• 3-Jaw thru-hole chuck
• Servo motor hydraulic turret (mm or Inch)
• Chip conveyor interface
• Hydraulic unit
• Programmable hydraulic tailstock quill
• Chuck with M function
• 400w coolant pump
• Boring bar tool holder: 2pcs
• OD tool holder: 2pcs
• U-drill tool holder: 2pcs
• Cycle finish light
• Tool box
• Operation manual and parts list |
|
|
