|
| TECHNICAL FEATURES: |
UNITS |
|
| Capacity |
Swing on bed |
mm/inch |
350 / 13.75" |
Swing on cross slide |
mm/inch |
280 / 11" |
| Distance between center |
mm/inch |
455 / 17.91" |
Standard turning dia |
mm/inch |
190 / 7.50" |
| Max. turning dia |
mm/inch |
240 / 9.50" |
Max. turning length |
mm/inch |
350 / 13.75" |
| Bar capacity |
mm/inch |
43 / 1.63" |
| Travel |
| X-axis stroke |
mm/inch |
140 / 5.50" |
| Z-axis stroke |
mm/inch |
350 / 13.75 " |
| Spindle |
| Spindle speed |
rpm |
40/5000 |
| Spindle nose |
|
Flat 140MM |
| Spindle thru-hole dia |
mm/inch |
56 / 2.25" |
| Spindle bearing dia |
mm/inch |
80 / 3.13" |
| Turret |
| Type of turret |
|
12-STATION |
| Height of square tool |
mm/inch |
20 / 0.79" |
| Dia of boring bar holder |
mm/inch |
32 / 1.26" |
| Tail stock |
| Stroke of tailstock |
mm/inch |
290 / 11.38" |
| Stroke of tailstock's shaft |
mm/inch |
100 / 4" |
| Tapper of tailstock |
|
MT4 |
| Tailstock's shaft hole dia |
mm/inch |
75 / 2.88" |
| Feed |
| Rapid travel X-axis |
m/min |
24 |
| Rapid travel Z-axis |
m/min |
30 |
| Jog feed rate X-axis |
mm/min |
0-1260 |
| Jog feed rate Z-axis |
mm/min |
0-1260 |
| Motor |
| Spindle motor |
kw |
5.5 / 7.5 |
| Servo motor X-axis |
kw |
0.6 |
| Servo motor Z-axis |
kw |
2.1 |
| Hydraulic pump |
kw |
- |
| Lubrication pump |
kw |
0.004 |
| Coolant pump |
kw |
400 |
| Power |
| Electric |
KVA |
17 |
| Air pressure |
Mpa |
0.5 |
| Air flow |
L/min |
- |
| Tank |
| Coolant tank |
L |
160 |
| Hydraulic |
L |
40 |
| Lubrication |
L |
2 |
| Size |
| Weight of machine |
Kgf |
3500 |
| Size of machine length |
mm/inch |
1950 / 77" |
| Size of machine height |
mm/inch |
1720 / 68 " |
| Size of machine width |
mm/inch |
1530 / 60" |
| Height of spindle's center |
|
- |
|
|
|
Standard accessories |
• Spindle motor
• X & Z axis servo motor
• 3-Jaw thru-hole chuck
• Servo motor hydraulic turret (mm or Inch)
• Chip conveyor interface
• Hydraulic unit
• Programmable hydraulic tailstock quill
• Chuck with M function
• 400w coolant pump
• Boring bar tool holder: 2pcs
• OD tool holder: 2pcs
• U-drill tool holder: 2pcs
• Cycle finish light
• Tool box
• Operation manual and parts list
|
|
|
